Model Numbers
SS1300, SS1310, SS1700, SS1710, SS1800, SS2000
Product Description
Destroy Layers
Designed for deep vertical tillage, the Great Plains Inline Sub-Soiler shatters yield-robbing compaction layers created by horizontal tillage tools such as plows, disks, and sweep implements. With a working depth of 10" to 16", this fall tillage tool resets the soil profile and maintains uniform soil density with minimal topsoil disturbance and no residue burial.
The Sub-Soiler’s frame features high-tensile, 3/8" wall tubing for added strength and durability. Units are available in 24", 30", 36", 38", or 40" shank spacings. Shanks range in number from 3 on 30", 36", 38", and 40" spacing up to 12 on 24" spacing. Choose from two shank options: ¾" and 1¼". The ¾" no-till shank and no-till point provide maximum shatter with minimum surface disturbance. The 1¼" straight leg shank creates more surface disturbance for minimum tillage. To achieve the full benefits of vertical tillage, it is important to select a point design that promotes horizontal fracture without blowout. The Sub-Soiler is offered with several different point options to fit a variety of conditions and needs.
Product Features
Point Options
Points for the 1¼" Straight-Legged Shanks are available in 2" or 7" widths, and with or without fins (fins minimize blow-out). The 2"-wide point is the least aggressive, while the 7"-wide point is the most aggressive and is used to cover more residue. A no-till point that is approximately 10" wide is used with the ¾" No-Till Shank. The no-till point minimizes surface disturbance and maximizes soil-structure-shatter below the surface. It also increases the amount of exposed surface residue and buries very little trash.
Optional Berm Conditioners
With 1" solid rods, the 16"-diameter berm conditioners mounted to each shank help provide a level surface, enabling single-pass seedbed preparation.
ADJUSTABLE GAUGE WHEEL
A screw jack makes adjusting the gauge wheels simple and easy.
2 Different Shank Options
Options include a 1¼" Straight-Legged Shank or a ¾" No-Till Shank. The no-till shank is not as aggressive as the straight-legged shank in turning the soil over and covering residue. In most soil conditions, the no-till shank only leaves a shank slot exposed on the soil surface and shows a gentle uplifting of the earth between shanks. Therefore, it should be used where less ground disturbance is desired. Replaceable wear shins are standard for either shank option.
Choice of Auto-Reset or Shear Bolt Shank Mounts
With 3,000 lb. trip force, the Auto-Reset Shanks provide stop-free operation in areas where sub-surface obstructions exist. Alternatively, the Shear Bolt Mounts provide obstruction protection at a lower purchase cost than the Auto-Reset Shanks.
20" Heavy-Duty Utility Coulters
Large 20" utility coulters cut residue directly in front of the shanks. This allows it to pass by without catching the shanks.
Product Specifications
| MODEL INFO | Sub-Soiler | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| MODELS | SS1300 | SS1310 | SS1700 | SS1710 | SS1800 | SS2000 | |||
| SHANK SPACING | 24", 30" | 36", 38", 40" | 24", 30" | 36", 38", 40" | 30", 36", 38", 40" | 24", 30", 36", 38", 40" | |||
| NUMBER OF SHANKS | 3, 4, 5, 6, 7, 8 | 3, 4 | 6, 7, 8, 9 | 5, 6, 7 | 6, 7 | 7, 8, 9, 10, 12 | |||
| TIRES |
20.5 x 8 10-ply (gauge wheels) |
||||||||
| WEIGHT (approx. lbs.) No-Till Shank | Auto-Reset | 2,339 - 3,778 | 3,140 - 5,914 | 2,925 - 4,148 | 4,260 - 6,408 | 4,850 - 5,125 | 5,840 - 7,400 | |||
| ENGINE H.P. REQ (min) | 195+ | 125+ | 250+ | N/A | 230+ | 363+ | |||
| DIMENSIONS | |||||||||
| TILLAGE WIDTH | 7' 6" - 16' | 15' - 23' 4" | 17" 6' - 20' | 20' - 25' 4" | |||||
| TRANSPORT WIDTH | 11' 2" - 16' 5" | 13' 4" - 21' 2" | 12' 9" - 13' 1" | 12' 9" - 15' 5" | |||||
| TRANSPORT HEIGHT | N/A | ||||||||
| TILLAGE INFO | |||||||||
| CENTER SECTION | N/A | N/A | N/A | N/A | N/A | N/A | |||
| 1ST WING SECTION | N/A | N/A | N/A | N/A | N/A | N/A | |||
| 2ND WING SECTION | N/A | N/A | N/A | N/A | N/A | N/A | |||
Warranty PDF
Download the warranty here: GP_Warranty.pdf
Sub-Soiler Inline Ripper 3-6 Shank: SS0300
Standard Manuals
Related Product Pages
The following are links to details and specifications for products that utilize this set of manuals: Sub-Soiler, Tiefenlockerer mit schmaler Bearbeitung.
Sub-Soiler Inline Ripper 3-8 Shank: SS1300 & SS1700
Standard Manuals
Field Adjustment Guides
Related Product Pages
The following are links to details and specifications for products that utilize this set of manuals: Sub-Soiler.
Sub-Soiler Inline Ripper 6-12 Shank: SS1800 & SS2000
Standard Manuals
Field Adjustment Guides
Related Product Pages
The following are links to details and specifications for products that utilize this set of manuals: Sub-Soiler.
Field Adjustment Guides
Product Literature
Product-Specific Co-Op Ad Slicks
Image Gallery
Click on a thumbnail below to see a larger, high-resolution version of the image.
