Model Numbers
Rigid: TC5109, TC5111, TC5113, TC5115
Folding: TC5313, TC5315, TC5317, TC5319,
TC5321, TC5323
Narrow Transport: TCN5107, TCN5309, TCN5311, TCN5313
Product Description
Hybrid Chisel
In the fall, vertical tillage should eliminate the soil’s density layers, leaving it ready for a one-pass tool before spring planting. Turbo-Chisel® is engineered to size and incorporate residue in the top 8-12" of soil, while leaving the surface level enough for a single-pass tool in the spring.
Turbo-Chisel starts by slicing residue with exclusive 22" Great Plains Turbo Coulters on 7½" spacing. Blades run on a 1¾" gang bolt with cast spools, putting the weight “in the gang” for outstanding performance and reliability. Gang bearings are field-proven, PEER® Maintenance-Free 211 Bearings with cast housings mounted to heavy-duty 1" x 3" C-shank standards. Plus, Turbo-Chisel’s coulter depth is hydraulically adjustable for on-the-go depth control.
This machine is offered in rigid 7-15 shank models or folding 9-23 shank models, with a recommended horsepower requirement of 30 hp per shank. Units can be equipped with optional chisel shanks, as well as optional Great Plains chopper wheels to crumble clods while leveling soil.
While there are other coulter chisels available on the market, there is only one Turbo-Chisel!
Product Features
Hybrid Machine with Heavy-Duty Toggle-Trip Shanks
When equipped with heavy-duty toggle-trip shanks, this “hybrid” unit works in the 8" to 12" range (rather than the 13" to 15" range required by disk rippers) while horizontally fracturing soil much better than a disk chisel. Toggle-trip shanks can’t float. They either run at the set depth or trip – there is no inbetween. The Heavy-Duty Toggle Trip Shank has a 2,450-pound horizontal trip force and will automatically reset when tripped.
Exclusive 22" Turbo Blades
On 7½" spacing, the 22" Turbo Blades outperform competitive tools by sizing and mixing residue on the surface. While competitive, concave-disc tools simply cut off and roll long, stringy stalks, Turbo Blades size residue to ensure maximized mixing and enhanced decay.
AVAILABLE SHANK COMBINATIONS
Order the Turbo-Chisel the way you want it with two different shank combinations: Standard Chisel (pictured: two shanks on the left) or Heavy-Duty Parabolic (pictured: shank on the far right).
Walking Tandem Axles
Maintain consistent mainframe height for accurate, consistent tillage depth control.
Optional Patented Angled Rear Chopper Wheel Attachment
Patented angled chopper wheels pull dirt back into shank voids, leveling soil while maintaining the vertically-tilled profile left by the shanks.
Exclusive Maintenance-Free Bearings
Reduce maintenance time and extend life of bearings. These 360° self-aligning bearings are never sideloaded. A six-lip seal on each side locks in grease and prevents contamination. Additionally, the walking beam pivots utilize Teflon™-coated bushings, eliminating the need for tapered bearings and grease in pivot points.
Product Specifications
Rigid Models
| Models |
TC5109 |
TC5111 |
TC5113 |
TC5115 |
|---|---|---|---|---|
| SHANK SPACING | 15" | 15" | 15" | 15" |
| COULTER SPACING | 7.5" | 7.5" | 7.5" | 7.5" |
| TRANSPORT TIRES |
12.5Lx15 12-ply (4) |
12.5Lx15 12-ply (4) |
12.5Lx15 F-ply (4) |
12.5Lx15 F-ply (4) |
| WEIGHT (approx lbs) | 8,080 | 9,835 | 11,240 | 12,600 |
| PTO H.P. REQ (min) | 200+ | 230+ | 270+ | 315+ |
|
DIMENSIONS |
||||
| TILLAGE WIDTH | 11' 3" | 13' 9" | 16' 3" | 18' 9" |
| TRANSPORT WIDTH | 11' 6" | 14' 3" | 16' 6" | 19' |
| TRANSPORT HEIGHT | N/A | N/A | N/A | N/A |
| TILLAGE INFO | ||||
| CENTER SECTION | 10' | 10' | 10' | 10' |
| 1ST WING SECTION | N/A | 2' 6" | 3' 6" | 4' 9" |
Folding Models
| Models | TC5313 | TC5315 | TC5317 | TC5319 | TC5321 | TC5323 |
|---|---|---|---|---|---|---|
| SHANK SPACING | 15" |
15" |
15" |
15" |
15" |
15" |
| COULTER SPACING | 7.5" | 7.5" | 7.5" | 7.5" | 7.5" | 7.5" |
| TRANSPORT TIRES |
12.5Lx15 F-ply (4) |
12.5Lx15 F-ply (4) |
12.5Lx15 F-ply (4) |
12.5Lx15 F-ply (4) |
12.5Lx15 F-ply (4) |
12.5Lx15 F-ply (4) |
| WEIGHT (approx lbs) | 11,280 | 12,900 | 13,700 | 14,200 | 15,650 | 16,250 |
| PTO H.P. REQ (min) | 270+ | 315+ | 355+ | 397+ | 440+ | 497+ |
| DIMENSIONS | ||||||
| TILLAGE WIDTH | 16' 3" | 18' 9" | 21' 3" | 23' 9" | 26' 3" | 28' 9" |
| TRANSPORT WIDTH | 14' 6" | 14' 6" | 14' 9" | 14' 9" | 14' 9" | 14' 9" |
| TRANSPORT HEIGHT | 9' 6" | 10' 3" | 11' | 12' 3" | 13' 6" | 14' 6" |
| TILLAGE INFO | ||||||
| CENTER SECTION | 10' | 10' | 10' | 10' | 10' | 10' |
| 1ST WING SECTION | 3' 6" | 4' 9" | 6' | 7' 3" | 8' 9" | 9' 6" |
Narrow-Transport Models
| MODELS | TCN5107 | TCN5309 | TCN5311 | TCN5313 |
|---|---|---|---|---|
| SHANK SPACING | 15" | 15" | 15" | 15" |
| COULTER SPACING | 7.5" | 7.5" | 7.5" | 7.5" |
| TRANSPORT TIRES |
12.5Lx15 12-ply (4) |
12.5Lx15 12-ply (4) |
12.5Lx15 12-ply (4) |
12.5Lx15 12-ply (4) |
| WEIGHT (approx lbs) | 7,300 | 10,500 | 11,500 | 12,100 |
| PTO H.P. REQ (min) | 170+ | 200+ | 230+ | 270+ |
| DIMENSIONS | ||||
| TILLAGE WIDTH | 8' 9" | 11' 3" | 13' 9" | 16' 3" |
| TRANSPORT WIDTH | 9' | 9' 10" | 9' 10" | 9' 10" |
| TRANSPORT HEIGHT | 5' 9" | 9' 5" | 9' 10" | 10' 3" |
| TILLAGE INFO | ||||
| CENTER SECTION | 9' | 9' | 9' | 9' |
| 1ST WING SECTION | N/A | 1' 9" | 2' 6" | 3' 9" |
Warranty PDF
Download the warranty here: GP_Warranty.pdf
Turbo-Chisel (S/N A1420X+): 5109, 5111, 5113, 5115, 5313, 5315, 5317, 5319, 5321 & 5323
Standard Manuals
Field Adjustment Guides
Related Product Pages
The following are links to details and specifications for products that utilize this set of manuals: Turbo-Chisel®.
Turbo-Chisel (S/N A1419X-): 5109, 5111, 5113, 5115, 5313, 5315, 5317, 5319, 5321 & 5323
Standard Manuals
Field Adjustment Guides
Related Product Pages
The following are links to details and specifications for products that utilize this set of manuals: Turbo-Chisel®.
Turbo-Chisel TCN: 5107, 5309, 5311 & 5313
Standard Manuals
Field Adjustment Guides
Related Product Pages
The following are links to details and specifications for products that utilize this set of manuals: Turbo-Chisel®, Turbo-Chisel - Narrow Transport.
Turbo Till Series I: 1000TT, 1200TT, 1700TT, 2200TT, 3000TT & 4000TT
Standard Manuals
Related Product Pages
The following are links to details and specifications for products that utilize this set of manuals: Turbo-Chisel®.
Field Adjustment Guides
Other Support Documents
For general PDF service documents for Great Plains products, please visit our Service Documents page in the Support Center section.
Product Literature
Product-Specific Co-Op Ad Slicks
Attachment Size 
Turbo-Chisel Full Page Co-Op Slick4.55 MB Turbo-Chisel Full Page B&W Co-Op Slick5.68 MB Turbo-Chisel Half Page Co-Op Slick1.82 MB Turbo-Chisel Half Page B&W Co-Op Slick1.81 MB Turbo-Chisel Quarter Page Co-Op Slick1.06 MB Turbo-Chisel Quarter Page B&W Co-Op Slick1014.73 KB
Image Gallery
Click on a thumbnail below to see a larger, high-resolution version of the image.
