Great Plains Nutri-Pro® offers anhydrous application

Tue, 15/07/2014

Nutri-Pro®3000-12C30 offers precise, efficient anhydrous application

SALINA, Kansas – With the introduction of an anhydrous coulter machine, Great Plains adds efficiency, accuracy, and versatility to its line of Nutri-Pro® Precision nutrient applicators, offering operators a multi-functional machine.

The new Nutri-Pro®3000-12C30 features a 22" anhydrous coulter blade for precise, high-speed anhydrous ammonia placement with minimal ground disturbance. With 1540 lb. pre-load, followed by the optional “spider” closing wheels, the Nutri-Pro3000-12C30 seals anhydrous fertilizer tightly in the ground with minimal loss and maximized efficiency.

“Because of its minimal disturbance, anhydrous fertilizer can be applied a month before spring planting, rather than applying in the fall and losing nitrogen to leeching and denitrification,” said Tom Evans, Vice President of Sales.

After the coulter blade opens the soil, a rigid tine deposits fertilizer up to 6" deep into the trench. Spider sealers follow to tightly seal nutrients in the ground, allowing virtually no gas to escape.

Additionally, the Nutri-Pro3000-12C30 increases productivity with its high-speed capabilities and precise application. Operators can quickly apply and seal anhydrous ammonia at a speed of 8 miles per hour. RTK and GPS guidance capabilities allow for exact, consistent fertilizer placement in proximity to the row.

In contrast to rigid shank machines, the anhydrous coulter is designed to endure high-residue conditions. A hydraulic system transfers weight to the wings, maintaining equal weight on all row units, yet closely follows ground contours for even nutrient application. Rear castering wheels provide excellent stability and maneuverability in the field.

Equipped with various options, the Nutri-Pro 3000/4000 product line offers operators a multi-functional applicator, available in three-section (3000 series) and five-section (4000 series) frames. Anhydrous application is offered in 30-inch and 20-inch row spacings. The anhydrous tine can also be easily changed to a liquid tine for liquid application. The Raven AccuFlow system is available for single- or dual-cooler configuration. As a dual-purpose machine, the Nutri-Pro 3000/4000 can be equipped with an even number of rows for pre-apply, then quickly converted to an odd number of rows for sidedress, offering valuable versatility to any farming operation.

About Great Plains
Great Plains Manufacturing was founded in 1976 by Roy Applequist and employs 1,600 people in eight Kansas communities and Sleaford, England. It encompasses five divisions: Great Plains Ag, which manufactures seedbed preparation, nutrient application, and seed placement equipment; Land Pride, which manufactures grounds maintenance tools such as mowers, rototillers, rotary cutters, and dirt-working equipment; Great Plains International, which sells the company’s products worldwide; Great Plains Trucking, which operates a nationwide fleet of flatbed trucks; and Great Plains Acceptance Corporation, which finances the company’s products. Great Plains Mfg., Inc., is headquartered in Salina, Kansas, and is a family-owned business.

Media Contact: Kendi Carlgren, Advertising/Media Coordinator
Reference Number: 1290D-GPM

Great Plains Manufacturing, Inc.
1525 East North Street
PO Box 5060
Salina, KS 67402-5060

Press Release Document