Great Plains Nutrient Application: Nutri-Pro
Great Plains Nutrient Application: Nutri-Pro

Nutri-Pro NP1330AA, NP1330LL

Great Plains Nutrient Application: Nutri-Pro

Model Numbers

NP1330AA, NP1330LL

Product Description

30' Model for NH3 and Liquid Application

Nutri-Pro® Liquid models feature a single row of our rugged Vantage 1 Fertilizer Coulters. These units are available in 20" or 30" row spacings, depending on the model. Liquid models are available with either a hydraulically-driven pump for variable-rate application or a ground-driven piston pump for set rates. Optional row cleaners are also available.

Nutri-Pro® Anhydrous models feature either high-speed coulters (available in 15" and 20" row spacings) or spring-reset shanks (available in 30" row spacings), depending on the model, and a choice of single or double Raven® Super Coolers. Units can be set up for single-rate application. Choose from double disc or the all-new spider wheel closers. A cushioned rear hitch is also available to pull a tank, if desired.
 

Product Features

VANTAGE I FERTILIZER COULTER (LL MODELS)

Heavy-duty swivel casting and spring assembly; 480 pounds of pre-load.

SUPER COOLER (AA MODELS)

Single or double super coolers are available depending on the rate of "N" required, the temperature, and ground speed.

NH3 NUTRI-PRO SPRING-RESET SHANKS

Springs reset shanks when tripped.

NH3 NUTRI-PRO HIGH SPEED ANHYDROUS COULTER
NH3 NUTRI-PRO HIGH SPEED ANHYDROUS COULTER

The new Anhydrous Coulter Option revolutionizes the application of anhydrous ammonia with a 22" anhydrous coulter blade for precise, high-speed anhydrous placement. With the ability to apply and seal anhydrous ammonia up to 6" deep at a speed of 8 miles per hour, the Anhydrous Coulter provides unmatched speed and productivity with minimal loss and maximized efficiency. Spider sealers tightly lock nutrients in the ground, allowing virtually no gas to escape. Minimal ground disturbance allows anhydrous fertilizer application closer to planting, preventing nutrient loss to leeching and denitrification. In contrast to rigid shank machines, the anhydrous coulter provides excellent stability and maneuverability in high-residue field conditions. Available in 30- and 20-inch row spacings.

FLOW CONTROL VALVES

Worm gear flow control valves on liquid models allow high volume flow and the ability to shut sections off. These state-of-the-art shutoff valves are faster and more reliable.

DISTRIBUTOR TOWERS (AA MODELS)

The stainless steel manifold ensures that the same amount of NH3 is given to each row. All hoses are the same length.

CUSHIONED REAR HITCH (OPTIONAL)

A cushioned rear hitch is available to absorb shock loads when pulling large liquid or anhydrous tanks. It can also be released to allow for easier alignment and hookup.

Product Features (PDF)

Download a PDF of the product features here: NP1330AA.pdf

Product Specifications

MODEL INFO

Nutri-Pro® Anhydrous

Nutri-Pro® Liquid

MODELS

NP1330AA

NP1330LL

ROW SPACINGS

15"*, 20"*, 30"

20", 30"

ROW COUNT

15" = 25, 20" = 18,

30" = 11, 12, 13

20" = 18,

30" = 11, 12, 13

DRAWBAR H.P. REQ. (min)

140

130

WEIGHT (approx. max)

11,100 lbs

11,100 lbs

TILLAGE WIDTH

26'11" to 31'7"

27'6" to 32'6"

WIDTH (transport)

17'4"

16'

HEIGHT (transport)

12'6"

12'6"

*Available with NH3 Coulters

Product Specifications PDF

Download the product specifications here: Nutri-Pro Specs.pdf

Warranty PDF

Download the warranty here: ApplicationWarranty.pdf

Field Adjustment Guides

Other Support Documents

Product Literature

Download product literature here: NP1330AA.pdf

General Co-Op Ad Slicks

The following are ad slicks that apply to multiple products, including this one:

Related News and Information

Great Plains Short Disk and Anhydrous Coulter earn AE50 recognition

Great Plains earns AE50 recognition
December 04, 2014

The American Society of Agricultural and Biological Engineers (ASABE) recently announced that Great Plains Ag Division has won two AE50 awards.

The Great Plains Short Disk™ and Nutri-Pro® Anhydrous Coulter have been deemed two of the year’s most innovative designs in engineering for the agriculture industry. Each of these products will be featured in the January/February 2015 special AE50 issue of Resource magazine. Great Plains has been awarded a total of 16 AE50 awards in the company’s history.